How to maintain the metal briquette press machine if it breaks down?

How to miantain the metal chips briquette press machine if it breaks down? Metal briquette press machines are used to compress and recycle: steel chips, iron chips, copper chips, aluminum chips or other metal powder and shavings. The final  product after compression is like a cylinder with same size but high density. This process helps to make the metal chips and powder recycling much easier, reducing the waste, reduce the transports cost and stock space. Teyun has designed and produced the briquette press machines with many models 125ton, 315ton, 500ton, 630ton, 800ton or 1000ton ect. for over 21 years and has became one of the famous manufacturers in China.  When using the briquette press machine, it may meet some problems, here are some tips from Teyun for your reference: 1. The feeding conveyor length control potentiometer of the metal briquetting machine is at the zero position. If adjusted clockwise, the strip length will become longer, otherwise it will become shorter; if the tape is in the zero position, the tape will not be output. 2. The metal briquetting machine is threaded incorrectly. Open the right door and thread the wire correctly according to the “Threading Process Method” or the threading diagram marked in the manual. 3. There is some matter in the extension part under the machine. The briquette press machine has been used for a long time and has not been cleaned and maintained in time, resulting in the accumulation of stolen goods in the machine. Therefore, more cleaning and maintenance should be done. 4. The gap between the belt feeding rollers of the metal chips briquette press machine is incorrect. See instructions for gap adjustment. Carefully adjust until the gap between the belt feed rollers is only 0.05~1mm larger than the belt thickness. 5. The PP tape is too thin or the metal briquette is too thick. Please carefully adjust the gap between the feed roller and the return roller according to the method in the manual. For the above five faults of the metal briquetting machine, the solutions are as follows: 1. Check the hydraulic oil in the machine. 2. Check whether the pressure regulating valve of the machine is loose. 3. Check whether there is any problem with the oil pump in the machine. To sum up, the rational use of metal chips briquetting machines can extend the service life of the machine, thereby saving costs and increasing revenue. The quality of equipment management has a decisive impact on the quantity, quality, cost and other economic and technical indicators of the company’s products. Therefore, it is very important to maintain your briquette press machine. Of course, if you can not fix your problems please contact us we have the professional engineers to help you to solve them.

TEYUN Fully Success of the Indonesia 32nd Manufacturing Machinery

Thank you for visiting our booth in the Indonesia 32nd manufacturing machinery 2023,in Jakarta. Teyun just finished the 4-days(6th~9th,DEC.) exhibition of manufacturing machinery-Expo,2023 in Jakarta, this is the third exhibition for Teyun to attend in this year. It’s a great honor for Teyun to meet so many new and common customers from Indonesia,Malaysia,Singapore and so on. During the exhibition, TEYUN booth attracted so many visitors to stop and talk with us. Our professional sales team introduced Teyun hot-sale products to the visitors, and showed them TEYUN advantages, 3D drawings ect. Because of the professional technical support and skilled communication, the visitors were very satisfied and left their business card for more detailed information and further communication. At the same time, Teyun visited the common customers who have cooperated with Teyun before, to check the machines running condition and know the customers’ feedback. Also, Teyun are invited by the new customers at the exhibition to visit their factories to talk more details about the coming cooperation. Teyun is very willing to go and give technical advice based on the actual inspection situation. Teyun feels grateful so much to all of our customers who trust us,  and also very grateful to those who helped us at the exhibition. Looking forward to the next meeting and in-depth cooperation with Teyun. To serve the local markets better, Teyun has set the agents in some countries and still tries to find someone or company to be the Teyun agents in  Australia, Russia and Indonesia. If you are interested in it, please contact us: [email protected].